Model 3100 / 3100I

Model 3100 is our certified wind load rated roll up sheet door that meets specified wind loads required by even the most stringent building codes. Laboratory testing proves how durable and strong this door really is. The quick installation and smooth operation, particularly compared to other doors, further demonstrates how user friendly this door is. #FL12765

General Description

  • Designed to meet stringent building codes in coastal regions
  • Utilizes 12” drum wheel
  • Maximum opening size of 16’ wide x 18’ high (288 sq.ft.)
  • Push-up, hand chain and electric operations
  • PSF Ratings:
    • +35 PSF and -41 PSF for opening widths through 12’
    • +35 PSF and -38 PSF for opening widths over 12’ through 16’

 

Curtain

  • 26-gauge galvanized corrugated steel
  • Grade 80 galvanized steel
  • 20 standard colors   (special colors upon request for a nominal upcharge)
  • Super Durable polyester paint coatings, which are corrosion resistant
  • Wash coat over primer interior side
  • 40-year film integrity warranty — up to 25-year chalk and fade
  • Flexible nylon wear strips

Bottom Bar

  • 24 gauge acrylic-coated galvalumed roll formed steel
  • 2” x 1 ½” galvanized angle
  • Bulb astragal (Durometer 75)
  • Stainless steel nuts and bolts

Axle/Torque Tube

  • 1-5/16” O.D. steel axle, 14-gauge
  • Oil tempered torsion springs conforming to ASTM A229
  • 16-gauge, 12” diameter galvanized drum
  • Low friction, grease-filled steel ball bearings staked in each drum
  • 26 gauge spiral torque tubing that houses axle assembly

Guides

  • 12 gauge galvanized steel guide, with 11 gauge windlock bar spot welded guide
  • Universal jamb mount
  • Vinyl guide wear strip
  • Bolt on head stop ¼” thick steel
  • Pre-punched for lock and attachment bolts
  • 2-7/8” guide depth

Hardware

  • Bottom bar mounted 10 gauge slide locks – 2 per door
  • Bottom bar mounted 16 gauge step plate – 2 per door
  • 12 gauge door mounting brackets
  • 1-5/16” tension holding device

Options

  • Insulation Series 3100 I (R-value 4)
  • Header seal
  • Top draft stop
  • Side draft stop
  • Chain hoist 5.7:1 reduction
  • Electric operator
  • Hood
  • Steel mounting plates
  • Stainless steel mini latch