Linear LDcO801
Single-Light Garage Door Operator w/ DC Motor, MegaCode & Optional Battery Backup – 800N
Superior, eco-friendly design
Smooth start and soft stop for ultra-quiet operation
Low-power standby mode dramatically reduces energy consumption
Supplies 800 Newtons of lifting force for heavy doors
Compatible with belt-drive or chain-drive T or I beam rails up to 10′
Intelligent, self-learning, self-adjusting, torque settings
100-watt courtesy light (bulb not included)
Built-in MegaCode format receiver
Battery Backup Compatible
1x Garage Door Operator Head
1x Deluxe Illuminated Wall Station
1x MTR3 3-button visor remote Control
1x Obstacle-Sensing Beams (w/35’ of wire)
1x Mounting Hardware
1x Wall Station wire (27’)
compatible accessories
The Model MDTK Keypad Transmitter is one of Linear’s MegaCode series of wireless radio controls designed for use with automatic garage door and gate operators. The MegaCode radio format provides unparalleled security with more than a million different codes.
In operation, the user enters their unique code on the unit’s keypad (1 to 6 digits long) and presses the START/STOP button to activate the door operator. For up to 30 seconds after the last activation, the MDTK can be re-triggered by simply pressing the START/STOP button again. This allows the user to stop or reverse the opener quickly, without having to re-enter their code..
- Activates multiple MegaCode receivers
- User selects 1 to 6 digit PIN number or 1 to 6 letter PIN name
- Programming is easy via the keypad; MegaCode receiver auto-learns PIN
- Backlit keys for easy viewing
- Wall mounting hardware (2 screws and anchors) supplied
- Power: 9-volt battery
- Codes: 1-6 digit PIN
- RF Frequency: 318 MHz
- Dimensions: 2.5″ W x 7.5″ H x .875″ D
The Model MCT-3 3-Channel Visor Transmitter is a wireless radio control designed for use with automatic garage and gate operators.
Each of the three transmitter buttons will send a unique code when pressed. One button can be used to activate the individual’s garage door opener, a second button can operate an access gate, a third button can activate an additional garage door operator or most Linear 318 MHz MegaCode wireless receivers.
- Activates three MegaCode receivers
- Test/operate LED
- Visor mounting clip supplied
- Visor clip mounts vertical or horizontal
- Power: Two 2032 batteries
- Codes: 1,000,000+ (MegaCode format)
- RF Frequency: 318 MHz
- Dimensions: 3″ W x 1.875″ H x .625″ D
The Model MCT-11 1-Channel Visor Transmitter is a wireless radio control designed for use with automatic garage and gate operators.
MegaCode transmitters and receivers do not contain a typical ”coding switch”. Each transmitter is permanently coded at the factory. The transmitter sends a unique code when the button is pressed. The receiver is programmed by learning a transmitter’s unique digital code. The receiver will activate only from the memorized transmitters.
The transmitter is powered by two Type 2032 coin-cell batteries. They should last 3 years with normal use. The red indicator on the face of the transmitter will glow when the unit is activated. If the indicator lights dimly, or not at all when transmitting, the batteries need to be replaced. To conserve battery life, an internal timer limits the transmission duration to 10 seconds if the transmitter button is held down.
- Activates one MegaCode receiver
- Test/operate LED
- Visor mounting clip supplied
- Visor clip mounts vertical or horizontal
- Power: Two 2032 batteries
- Codes: 1,000,000+ (MegaCode format)
- RF Frequency: 318 MHz
- Dimensions: 3″ W x 1.875″ H x .625″ D
The easy-to-mount BBU accessory complements Linear’s popular LDCO800 DC-powered Garage Door Operator. Exceptionally compact, the BBU mounts entirely inside the LDCO800 enclosure, maintaining the aesthetically-pleasing characteristics of the DC operator, while delivering peace of mind to homeowners when power failure conditions occur. In the absence of AC line power, the BBU will continue to deliver power to the LDCO800 for up to 24 hours, depending upon when the door is first operated after the power outage.
- Provides peace-of-mind to homeowners
- Easily integrates with all Linear LDCO800 Garage Door Operators
- Supplies 800 Newtons of lifting force for heavy doors
- Delivers smooth, efficient power in the event of a power failure
- Compact kit contains all necessary installation/mounting hardware
- Plug-and-play with new LDCO800 garage door operators using the HAE00061 version control board
- Dimensions: 4.25″ W x 5.00″ H x 3.12″ D
The Linear LDCO800 is compatible with Belt/Chain Drive T or I Beam rails up to 10′
Chain Drive T-Rail
Belt Drive T-Rail
