Linear LDcO863b
Compatible with Amazon Alexa™, GoogleAssistant™, and IFTTT™ on your smartphone
The smart operator with an ultra-quiet, energy-efficient, DC-powered motor that runs at an AC-equivalent speed. Our smart technology provides monitoring and control anytime, anywhere with Wi-Fi connectivity. Smooth, quiet, long-term reliable. Included Battery Backup for peace of mind, plus smart wall station and three-channel transmitter
.
- Control and monitor the LDCO852 garage door operator via mobile device with the Linear PRO Access app
- Offers up to ten authorized users passive/hands-free opening and closing of the LDCO852 garage door
- Free app can be used with most smartphones and tablets
- Real-time monitoring and control of garage door — anywhere, anytime
- Your garage door opens when you arrive home and closes when you leave — hands free
- Up to ten authorized users
- Set custom access and permissions for each user
- Scheduling of door and light operation, including timed, automatic door closing
- Compatible with Amazon Alexa™, Google Assistant™ and IFTTT™
- Ultra-smooth, quiet performance thanks to variable speed operation
- Two dimmable LED light panel, 200W equivalent, energy efficient
- Integrated battery backup included for peace of mind
- Self-diagnostic, self-adjusting system continually checks for proper operation
- Compatible with HomeLink™
- American engineering and quality assurance
- Low-power standby mode dramatically reduces energy consumption
- Supplies 800 Newtons of lifting force for heavy doors
- Recommended with belt-drive or chain-drive T or I beam rails of 7′ or 8′
- Built-in MegaCode format receiver
Operator comes with three-button MTR3 visor transmitter, Battery Backup, LPWWS wall station, and sensor eyes.
compatible accessories
The Model MDTK Keypad Transmitter is one of Linear’s MegaCode series of wireless radio controls designed for use with automatic garage door and gate operators. The MegaCode radio format provides unparalleled security with more than a million different codes.
In operation, the user enters their unique code on the unit’s keypad (1 to 6 digits long) and presses the START/STOP button to activate the door operator. For up to 30 seconds after the last activation, the MDTK can be re-triggered by simply pressing the START/STOP button again. This allows the user to stop or reverse the opener quickly, without having to re-enter their code..
- Activates multiple MegaCode receivers
- User selects 1 to 6 digit PIN number or 1 to 6 letter PIN name
- Programming is easy via the keypad; MegaCode receiver auto-learns PIN
- Backlit keys for easy viewing
- Wall mounting hardware (2 screws and anchors) supplied
- Power: 9-volt battery
- Codes: 1-6 digit PIN
- RF Frequency: 318 MHz
- Dimensions: 2.5″ W x 7.5″ H x .875″ D
The Model MCT-3 3-Channel Visor Transmitter is a wireless radio control designed for use with automatic garage and gate operators.
Each of the three transmitter buttons will send a unique code when pressed. One button can be used to activate the individual’s garage door opener, a second button can operate an access gate, a third button can activate an additional garage door operator or most Linear 318 MHz MegaCode wireless receivers.
- Activates three MegaCode receivers
- Test/operate LED
- Visor mounting clip supplied
- Visor clip mounts vertical or horizontal
- Power: Two 2032 batteries
- Codes: 1,000,000+ (MegaCode format)
- RF Frequency: 318 MHz
- Dimensions: 3″ W x 1.875″ H x .625″ D
The Model MCT-11 1-Channel Visor Transmitter is a wireless radio control designed for use with automatic garage and gate operators.
MegaCode transmitters and receivers do not contain a typical ”coding switch”. Each transmitter is permanently coded at the factory. The transmitter sends a unique code when the button is pressed. The receiver is programmed by learning a transmitter’s unique digital code. The receiver will activate only from the memorized transmitters.
The transmitter is powered by two Type 2032 coin-cell batteries. They should last 3 years with normal use. The red indicator on the face of the transmitter will glow when the unit is activated. If the indicator lights dimly, or not at all when transmitting, the batteries need to be replaced. To conserve battery life, an internal timer limits the transmission duration to 10 seconds if the transmitter button is held down.
- Activates one MegaCode receiver
- Test/operate LED
- Visor mounting clip supplied
- Visor clip mounts vertical or horizontal
- Power: Two 2032 batteries
- Codes: 1,000,000+ (MegaCode format)
- RF Frequency: 318 MHz
- Dimensions: 3″ W x 1.875″ H x .625″ D
- Activates multiple MegaCode receivers
- User selects 1 to 6 digit PIN number or 1 to 6 letter PIN name
- Programming is easy via the keypad; MegaCode receiver auto-learns PIN
- Backlit keys for easy viewing
- Wall mounting hardware (2 screws and anchors) supplied
- Power: Three AAA batteries
- RF Frequency: 318 MHz
- Dimensions: 2.5″ W x 5.6″ H x 1.1″ D