[vc_row][vc_column width=”1/3″][vc_column_text][/vc_column_text][/vc_column][vc_column width=”2/3″][vc_column_text]

[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”5/6″][vc_tta_tour][vc_tta_section title=”Overview” tab_id=”1467306296009-3079e03f-ec3d”][vc_column_text]

OVERVIEW

[/vc_column_text][/vc_tta_section][vc_tta_section title=”Sections” tab_id=”1467306296098-17a7ed9b-3633″][vc_column_text]

SECTIONS

SECTION CONSTRUCTION:

• Roll-formed sections are 24-gauge 2″ thick, hot-dipped galvanized with a baked-on polyester finish
• Box shaped stiles are riveted to the face of the section and are galvanized for additional corrosion protection
• Tongue and groove meeting rails provide superior rail strength and weather resistance
• Panel Profile: 2 horizontal ribs with alternating “V” grooves

Insulation

• 1-1/2” thick CFC free polystyrene
• Vinyl inside cover laminated to polystyrene
• R value 8.00 (R-value Testing is in accordance with ASTM C518 standards)
  
  20-gauge ribbed steel panel
  

  Ribbed Insulation Detail

  Polystyrene Insulation with
  Vinyl Backer

  
  Tongue & Groove meeting rails
  seal out the elements
  
  Box-shaped stiles provide added
  rigidity and section strength

  MAXIMUM STANDARD SIZE:

  • Max width 24’2” x 16’ high (Contact Factory for larger sizes)

Colors / Finish:

White

Gray

Sandstone

Brown

Optional Colors include RAL powder-coat in 188

Panel Configurations:

• 21″ or 24″ high by width of door

[/vc_column_text][/vc_tta_section][vc_tta_section title=”Track” tab_id=”1467306404500-b55b7d27-5bf7″][vc_column_text]

TRACK

Track Configuration:

• Tracks are 2′ or 3′, as specified
• 12″ radius, 15″ radius
• Normal Headroom, Low Headroom, Vertical Lift, High Lift, Incline
• 20″ & 32″ radius (2″ track & up to 10′ high doors only)

Normal Headroom / Standard Lift View>>

Low Headroom: Front Mount View>>

Low Headroom: Rear Mount View>>

Vertical Lift View>>

High Lift View>>

Incline View>>

Mounting Options:

• Bracket Mount (leg out), Clip Angle Track, Continuous Angle Track

Bracket Mount View>>

Clip Angle Track View>>

Continuous Angle Track View>>

Reverse Angle Mount View>>

Available for Clip Angle & Continuous Angle Track

Track Gauge:

• 2″ Tracks – up to 8′-0″ high = 17 gauge roll-formed galvanized steel
• 2″ Tracks – 8′-0″ 10′-0″ = 16 gauge
• 2″ Tracks – over 10′-0″ = 14 gauge
• 3″ Tracks – 12 gauge

[/vc_column_text][/vc_tta_section][vc_tta_section title=”Hardware” tab_id=”1467306449785-f0898cfc-ab58″][vc_column_text]

HARDWARE

[/vc_column_text][/vc_tta_section][vc_tta_section title=”Operation” tab_id=”1467306470721-28320d56-034c”][vc_column_text]

OPERATION

Counterbalance System (Springs)

• Oil tempered torsion springs are mounted on a cross-header shaft supported by galvanized steel ball breaking end plates and center bracket(s)
• Springs are calculated for exact door weight, size and trajectory in accordance with ANSI 102 standards for a minimum of 10,000 cycles
  NOTE: May be specified for higher cycles when available
• Counterbalance is transferred through galvanized aircraft quality cables secured to bottom of the door

Above, Torsion/Spring Assembly with Four Spring Layout, Standard Headroom

Operation:

• Manual Operation
• Motor Operation: Trolley or Jackshaft
• Chain Hoist Operation

Jackshaft Operation

Trolley Operation

[/vc_column_text][/vc_tta_section][vc_tta_section title=”Lites” tab_id=”1467306500147-fbeedacc-c0ed”][vc_column_text]

LITES

[/vc_column_text][/vc_tta_section][vc_tta_section title=”Optional Accessories” tab_id=”1467306523803-d86478ff-7d32″][vc_column_text]

OPTIONAL ACCESSORIES

---

Doors are available with a variety of Specialty Options for specific installation needs. Contact Factory for additional options.

Swing-Up Sectional Post A perfect answer for openings that are too large for a single overhead door that must accommodate large machinery or equipment on an infrequent basis. Operating on a single pivot point that is designed to swing left or right, it allows the use of one (1) smaller door for everyday requirements and the full opening when needed. See video.

Pass Doors Whether it’s for convenience or necessity, there are circumstances where a pass-through door is requested to provide ingress and egress in an overhead door enclosed opening without having to open the overhead door. C.H.I. can accommodate this need with a state-of-the-art design pass-door option. Available in our urethane core models 3216 and 3212, it’s the ideal choice to solve this need.

Header & Jamb Seals Seal the perimeter of the opening to provide additional air infiltration and thermal protection.

[/vc_column_text][/vc_tta_section][vc_tta_section title=”Ceirtified Windload” tab_id=”1474054207302-cf500b38-c938″][vc_column_text]

CERTIFIED WINDLOAD

Wind can be unpredictable and destructive. This is why C.H.I. Windbreaker Series and iSeries doors are designed, tested, and built to the most rugged specifications. Wind chamber tested to ensure windload resistance, these extra-sturdy designs provide enhanced defense against the elements.

C.H.I. Overhead Doors developed the resilient Windbreaker Series garage doors to protect against high wind conditions. The super-resilient C.H.I. iSeries Impact Approved doors have strength designed to withstand direct collision of projectiles and other windborne debris at high speeds.

Additional Windload Information:
Navigating the complex windload codes and compliances can be a daunting task. C.H.I. sales associated and distributors are able to help you understand the specific codes governing your geographic area. For additional information, these websites offer a great deal of information.

Technical Data Sheets:

• TDS #168 – Wind Loads on Garage Doors – FAQ
• TDS #177 – Application of Kd Factor To Garage Door Wind Load Determination Using ASCE 7
• TDS #178 -Garage Door Wind Load Determination – Effective Wind Area
• TDS #180 – Wind Load Ratings for Non-Tested Garage Door and Rolling Door Sizes
• TDS #181 -General Code Inspection Guidelines For Wind Load Rated Garage Doors

[/vc_column_text][/vc_tta_section][vc_tta_section title=”Specs & Drawings” tab_id=”1467306652482-3ac93c2f-330f”][vc_column_text]

Door Width/Panels Across Chart
Door Height/Panels Across Chart

Track Resources
Standard Lift Doors
Low Headroom: Front Mount
Low Headroom: Rear Mount
High Lift Doors
Vertical Lift Doors
Reverse Angle Track: Leg In (Steel Jambs Shown)
Bracket Mounted Track Angle Mounted Track: Leg out (Wood Jambs Shown)

[/vc_column_text][/vc_tta_section][/vc_tta_tour][/vc_column][/vc_row]