[vc_row][vc_column][vc_column_text]7000-rolling-steel-fire-doors-overviewROLLING STEEL

Rolling Fire Doors 7000

 

7000 Series Fire Doors Models: 7301 – 7302 – 7366 – 7400 – 7401

Safe, simple, inexpensive and repeatable drop testing is made possible in any facility with a flip of a handle. C.H.I.’s Guardian™ Fire Doors promote achievable standards for drop test compliance by making the job safe, understandable and simple for everyone. Simple test fire doors are our standard for chain hoist and motor operated doors. Choose from models in a variety of gauges and U.L. label ratings from 3/4-hour to 4-hour protection.

[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_separator color=”white”][/vc_column][/vc_row][vc_row][vc_column width=”3/4″][vc_tta_tour active_section=”1″][vc_tta_section title=”Overview” tab_id=”1470079199829-0b6485a2-8375″][vc_column_text]

OVERVIEW


Manual push-up, chain hoist and automatic reset motor operation is available for Guardian™ Fire Doors and can incorporate one of several release device options. The National Fire Protection Association (NFPA) and other model codes recommend frequent drop testing of rolling steel doors to ensure a continuous state of operational readiness. C.H.I. strongly promotes these recommendations with the Guardian’s™ advanced design features.

Rolling Fire Doors are available in a variety of gauges, materials and fire-ratings to achieve your project requirements.

Fire Rating & Curtain:
3/4, 1-1/2 or 3 Hour Rating:

  • 7301: 20 or 22 gauge / Non-Insulated / Flat Slat
  • 7302: 20 or 22 gauge / Mineral Wool / Flat Slat
  • 7366: 22 gauge Stainless Steel/Flat Slat

3/4, 1-1/2, 3 or 4 Hour Rating:

  • 7400: 18, 20 or 22 gauge / Non-Insulated/Curved

4 Hour Rating:

  • 7401: 18, 20 or 22 gauge / Non-Insulated / Flat Slat

Operation: Manual push-up, chain hoist (standard) or motor operation

Available Standard Colors:

  • Gray, White, or Galvanized for model 7301 & 7302 (20 gauge), 7400 & 7401 (18 & 20 gauge)
  • Gray, White, Tan, Brown, or Galvanized for model 7301, 7302, 7400 & 7401 (22 gauge)
  • #4 finish for model 7366

Powder coat: 188 RAL powder coat color options*
*not available for model 7366

Half-hexagonal formed hoods deliver superior structural rigidity and aesthetic appeal

Options and accessories available

Warranty >>

[/vc_column_text][/vc_tta_section][vc_tta_section title=”Curtain” tab_id=”1470079199899-2e6e142a-add2″][vc_column_text]

CURTAIN


SLAT PROFILE:

  • Flat Slat (FS) cover 2-1/2” high by ¾” deep
  • Curved Slat (CS) cover 2-5/8” high x 7/8” deep
flat-slat-detail-25
 F2.5 Flat Slat Detail
Models 7401
f2-7-mineral-wool-insulated-flat-slat-7000
F2.7 Flat Slat Detail with Mineral Wool
Model 7302

F2.7 Flat Slat Detail
Models 7301, 7366
flat-slat-detail-front
 Flat Slat Curtain- Exterior Detail
curved-slat-detail-26
C2.6 Curved Slat Detail
Model 7400
curved-slat-detail-front
Curved Slat Curtain- Exterior Detail

GAUGE & MAXIMUM SIZE:

  • 7301: 20 gauge / Flat Slat, 24’0″ max std. width / 24’0″ max std. height
  • 7301: 22 gauge / Flat Slat, 18’0″ max std. width / 24’0″ max std. height
  • 7302: 20 gauge / 24 gauge backer / Flat Slat, 24’0″ max std. width / 24’0″ max std. height
  • 7302: 22 gauge / 24 gauge backer / Flat Slat, 18’0″ max std. width / 24’0″ max std. height
  • 7366: 22 gauge Stainless Steel/Flat Slat, 13’4″ max std. width / 24’0″ max std. height
  • 7400: 18 gauge / Flat Slat, 24’0″ max std. width / 24’0″ max std. height
  • 7400: 20 gauge / Curved Slat, 18’4″ max std. width / 24’0″ max std. height
  • 7400: 22 gauge / Curved Slat, 13’4″ max std. width / 24’0″ max std. height
  • 7401: 18 gauge / Flat Slat, 24’0″ max std. width / 24’0″ max std. height
  • 7401: 20 gauge / Flat Slat, 18’4″ max std. width / 24’0″ max std. height
  • 7401: 22 gauge / Flat Slat, 13’4″ max std. width / 24’0″ max std. height

COLOR/FINISH:

front-exterior-color-white
White
front-exterior-color-gray
Gray
front-exterior-color-galvanized
Galvanized
front-exterior-color-tan
Tan (22 gauge only)
front-exterior-color-brown
Brown (22 gauge only)
stainless-steel-door
Stainless Steel with #4 finish

ENDLOCKS & WINDLOCKS:

  • Malleable, zinc-placted cast iron endlocks and windlocks maintain curtain alignment and increase windload capacity. Galvanized malleable cast endlocks are fastened to every other slat. Windlocks are added as dictated by door size & windload requirement.
endlock
Endlocks
windlock
Windlocks

VISION PANELS:
5″ x 1-1/8″ lites available in a variety of patterns (not available for model 7302)

vision-panels

FIRE LABELS:Guardian™ Fire Doors carry standard listing or oversize U.L. Labels

fire-label-listing
C.H.I. Listing Label
fire-label-oversize
C.H.I. Oversize Label

[/vc_column_text][/vc_tta_section][vc_tta_section title=”Hood” tab_id=”1470079248740-4498e247-95ce”][vc_column_text]

HOOD


HALF-HEXAGONAL FORMED HOOD:

  • Unique half-hexagonal shape is more rigid and easier to handle and install than more traditional round hoods.
  • Fabricated from minimum 24 gauge galvazined steel sheet shaped to fit within the headplates.
  • Intermediate hood support(s) furnished as required.
  • Available in colors/finishes to match curtain.
  • Model 7366: 24 gauge painted steel (standard) or optional 24 gauge #4 stainless steel hood

half-hex-hood

fire-door-large

[/vc_column_text][/vc_tta_section][vc_tta_section title=”Mounting Options” tab_id=”1470079278901-1204beff-1c8f”][vc_column_text]

MOUNTING OPTIONS


MOUNTING OPTIONS: Face of Wall or Between Jambs Mount to Steel, Masonry or Wood Jambs

face-of-wall-mount
Face of Wall Mount

mount-z-guide-detail
Z Guides (Steel or Masonry)

mount-e-guide-detail
E Guides (Steel)

mount-between-jamb-full
Between Jamb Mount

mount-between-jamb-detail
Between Jamb Mount (Steel, Masonry or Wood)

GUIDES:

  • Fabricated from three (minimum 3/16″ structural steel angles bolted together to form guide channel.
  • Guide angles include curtain stops & flared guides
  • Hot-dipped or cold sprayed galvanized guides (optional)
  • Stock RAL powder-coat in 188 colors options

HEADPLATES:

  • Fabricated from minimum 1/4” steel plate.
  • Drive side of barrel to be provided with precision sealed ball bearing in cast iron housing
headplate
Headplates vary in size according to door size

[/vc_column_text][/vc_tta_section][vc_tta_section title=”Operation” tab_id=”1470079293166-0270372f-e1ec”][vc_column_text]

OPERATION


Available with Chain-hoist (standard), Manual Push-up and Motor Operation

chain-hoist-operation
Chain-hoist operation
(comes standard)
motor-operation
Motor Operation

SPEED & LOAD SENSING CENTRIFUGAL GOVERNOR:

  • Gear reduced chain hoist features a centrifugal governor that can be adjusted to control the drop speed of the door.
  • This allows door to be closed to the floor evenly and smoothly at a constant speed.
fire-door-governor

MOTOR OPERATION:

  • Available in 1/3 to 5 HP as required; single- or three-phase available
  • Refer to the motor operator area chart to select operator type based on dimensions and gauge
  • Choose between wall mount or front of headplate mount. Use the charts to determine headroom, sideroom and backroom clearance requirements.

SPRINGS:

  • Spring tension assembly within barrel by precision ball bearings.
  • Assembly designed for 20,000 cycle life springs (Standard). Higher cycles optional
counterbalance
Counterbalance

[/vc_column_text][/vc_tta_section][vc_tta_section title=”Activation Devices” tab_id=”1470081410145-1ad87408-4861″][vc_column_text]

ACTIVATION DEVICES


  • 165-degree fusible links provided as standard detection/release devices
  • Fail-safe time delayed releases, smoke detectors and audible and visual warning systems are optional
  • Drop speed is controlled by quiet governor – closing speed is between 6” to 24” per second per NFPA 80
7000-lever
Simple Test: Standard feature used for drop testing and resetting of the fire door from the floor without ladders, tools or other equipment.
7000-motor
Auto-Reset Operator automatically resets following a drop test or activation and is operable as soon as the alarm is cleared.

DETECTION & ACTIVATION OPTIONS:
A variety of activiation and detection devices are available to meet the unique needs of your project. Choices include but are not limited to: photoelectric smoke detectors, heat detectors, fail-safe time delayed releases, horn and strobe, and speaker and strobe. Contact factory for additional products.

smoke-detector
Smoke Detectors
speaker-strobe
Speaker Strobes
horn-strobe
Horn Strobes
heat-detector
Heat Detectors

[/vc_column_text][/vc_tta_section][vc_tta_section title=”Door Options” tab_id=”1470079335265-33c473a1-1cdc”][vc_column_text]

DOOR OPTIONS


SMOKE SEALS:

fire-door-smoke-seal

  • UL listed, brush type smoke seal package limits the smoke migration through the door.

FLAME BAFFLES:

    • Rolling fire doors may be specified with optional flame baffle to prevent spread of fire as required*.

*C.H.I. Guardian™ Fire Doors do not require a flame baffler to meet certification requirements, however it can be added to provide an extra degree of protection against flame spread.

LOCKS:

  • Chain hoist doors operated doors furnished with chain hoist keeper suitable for padlocking. Plated slide locks optional.

slidelocks[/vc_column_text][/vc_tta_section][vc_tta_section title=”Specs & Drawings” tab_id=”1470079366138-57c3f8f1-d1ca”][vc_column_text]

SPECS & DRAWINGS


[/vc_column_text][/vc_tta_section][/vc_tta_tour][/vc_column][vc_column width=”1/4″][/vc_column][/vc_row]

https://bluepill.shop tadalafil 10mg sildenafil citrate aboutcialisgeneric.com cialis cost levitra 20 mg what is propecia buy modafinil chaturbate लाइव सेक्स शो https://sexlovecam.live