OVERVIEW
- Clean modern look combined with its flexibility, durability and quality
- 2″ Thick Sections with Rail & Stile Construction assembled with through bolts at each vertical stile location
- Glass or Aluminum Panels (Insulated or ¼” tempered glass available in some sizes)
- Max Width – 20’2″ (contact customer service for larger sizes)
- Colors – Available in clear anodized aluminum, white or stock RAL powder-coat option in 188 colors
- Various accessories and options available.
SECTIONS
- Section joints are tongue-and-groove for a superior weatherseal
- Wide bottom rails, top rails, and end stiles create an extra-strong frame for the door
- Insulated and 1/4″ tempered glass is available in some sizes
- Aluminum panels can be substituted for glass panels
- Glass or aluminum garage door panels can be easily replaced by removing an inside retainer
- Bottom “U” type astragal is a standard feature
Insulation:
- 3/8″ Insulation available with aluminum panel option
Colors:
- Clear anodized (6063-T6)
- White
- Optional Colors include RAL powder-coat in 188 colors
Resources
Documents
>>View Door Width/Panels Across Chart
>>View Door Height/Number of Sections Chart
TRACK
Track Configuration:
- Tracks are 2′ or 3′, as specified
- 12″ radius, 15″ radius
- Normal Headroom, Low Headroom, Vertical Lift, High Lift, Incline
- 20″ & 32″ radius (2″ track & up to 10′ high doors only)
Track Gauge:
- 2″ Tracks – up to 8′-0″ high = 17 gauge roll-formed galvanized steel
- 2″ Tracks – 8′-0″ 10′-0″ = 16 gauge
- 2″ Tracks – over 10′-0″ = 14 gauge
- 3″ Tracks – 12 gauge
HARDWARE
Hinges:
- 11-gauge or 14-gauge hinges, as specified
Rollers:
- 2″ or 3″ long-stem or short-stem steel ball bearings rollers
Brackets:
- Top fixtures (min. 12 gauge)
- Bottom fixtures (min. 13 gauge)
Single or Double Edge Endstiles:
OPERATION
Counterbalance System (Springs)
- Oil tempered torsion springs are mounted on a cross-header shaft supported by galvanized steel ball breaking end plates and center bracket(s)
- Springs are calculated for exact door weight, size and trajectory in accordance with ANSI 102 standards for a minimum of 10,000 cycles
NOTE: May be specified for higher cycles when available - Counterbalance is transferred through galvanized aircraft quality cables secured to bottom of the door
Above, Torsion/Spring Assembly with Four Spring Layout, Standard Headroom
Operation:
- Manual Operation
- Motor Operation: Trolley or Jackshaft
- Chain Hoist Operation
Jackshaft Operation
Trolley Operation
GLASS OPTIONS
Optional Window Designs:
- Optional field glazing
- 1/8″ (DSB or tempered) plain, tinted or frosted
- 1/8″ polycarbonate
- 1/4″ (tempered) plain, tinted or frosted
- 1/4″ clear or white laminated
- 1/2″ (insulated or tempered insulated) plain, tinted, frosted or low E
- Custom glass options available. Contact factory.
SPECS / DRAWINGS
Section Resources
Door Width/Panels Across Chart
Door Height/Panels Across Chart
Track Resources
Standard Lift Doors
Low Headroom: Front Mount
Low Headroom: Rear Mount
High Lift Doors
Vertical Lift Doors
Reverse Angle Track: Leg In (Steel Jambs Shown)
Bracket Mounted Track Angle Mounted Track: Leg out (Wood Jambs Shown)