3295

[vc_row][vc_column width=”1/4″][vc_column_text] aluminum-garage-door-3295_0 [/vc_column_text][/vc_column][vc_column width=”3/4″][vc_column_text]

[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_tta_tour active_section=”1″][vc_tta_section title=”Overview” tab_id=”1466714783578-c2a7e20d-3e0c”][vc_column_text]

OVERVIEW

Clean modern look combined with its flexibility, durability and quality
2″ Thick Sections with Rail & Stile Construction assembled with through bolts at each vertical stile location
Glass or Aluminum Panels (Insulated or ¼” tempered glass available in some sizes)
Max Width – 20’2″ (contact customer service for larger sizes)
Colors – Available in clear anodized aluminum, white or stock RAL powder-coat option in 188 colors
Various accessories and options available.

Warranty>>[/vc_column_text][/vc_tta_section][vc_tta_section title=”Sections” tab_id=”1466714783670-829fd792-8d1f”][vc_column_text]

SECTIONS

Section joints are tongue-and-groove for a superior weatherseal
Wide bottom rails, top rails, and end stiles create an extra-strong frame for the door
Insulated and 1/4″ tempered glass is available in some sizes
Aluminum panels can be substituted for glass panels
Glass or aluminum garage door panels can be easily replaced by removing an inside retainer
Bottom “U” type astragal is a standard feature

Insulation:

3/8″ Insulation available with aluminum panel option

Colors:

Clear anodized (6063-T6)
White
Optional Colors include RAL powder-coat in 188 colors

Resources

Documents

>>View Door Width/Panels Across Chart
>>View Door Height/Number of Sections Chart[/vc_column_text][/vc_tta_section][vc_tta_section title=”Track” tab_id=”1473870778699-929ee975-6c7f”][vc_column_text]

TRACK

Track Configuration:

Tracks are 2′ or 3′, as specified
12″ radius, 15″ radius
Normal Headroom, Low Headroom, Vertical Lift, High Lift, Incline
20″ & 32″ radius (2″ track & up to 10′ high doors only)

Normal Headroom / Standard Lift View>>

Low Headroom: Front Mount View>>

Low Headroom: Rear Mount View>>

Vertical Lift View>>

High Lift View>>

Incline View>>

Mounting Options:

Bracket Mount (leg out), Clip Angle Track, Continuous Angle Track

Bracket Mount View>>

Clip Angle Track View>>

Continuous Angle Track View>>

Reverse Angle Mount View>>

Available for Clip Angle & Continuous Angle Track

Track Gauge:

2″ Tracks – up to 8′-0″ high = 17 gauge roll-formed galvanized steel
2″ Tracks – 8′-0″ 10′-0″ = 16 gauge
2″ Tracks – over 10′-0″ = 14 gauge
3″ Tracks – 12 gauge

[/vc_column_text][/vc_tta_section][vc_tta_section title=”Hardware” tab_id=”1466714859240-cff2acb2-5b86″][vc_column_text]

HARDWARE

Hinges:

11-gauge or 14-gauge hinges, as specified

double-end-hinges

Rollers:

2″ or 3″ long-stem or short-stem steel ball bearings rollers

2-inch, 3-inch Steel Rollers

Brackets:

Top fixtures (min. 12 gauge)
Bottom fixtures (min. 13 gauge)

3bottom-fixture

Single or Double Edge Endstiles:

4double-hinge-end-stiles [/vc_column_text][/vc_tta_section][vc_tta_section title=”Operation” tab_id=”1466714888424-7c164235-a1af”][vc_column_text]

OPERATION

Counterbalance System (Springs)

Oil tempered torsion springs are mounted on a cross-header shaft supported by galvanized steel ball breaking end plates and center bracket(s)
Springs are calculated for exact door weight, size and trajectory in accordance with ANSI 102 standards for a minimum of 10,000 cycles
NOTE: May be specified for higher cycles when available
Counterbalance is transferred through galvanized aircraft quality cables secured to bottom of the door

1-torsion-spring-assembly